Filter
Top Products
- 24 - EN
AUTO RETURN
With this feature, after timer recording is finished,
the beginning of the recorded program(s) can be
searched for automatically.
1 Select “USER’S SET UP”
Press [MENU].
Press
[PLAY/
KK
] or [STOP/
LL
] to
point to “USER’S SET UP”, then
press [F.FWD/
BB
].
2 Set “AUTO RETURN” to [ON]
Press [PLAY/
KK
] or [STOP/
LL
] to
point to “AUTO RETURN”, then
press [REW/
ss
] or [F.FWD/
BB
]
until [ON] appears.
3 Auto Return will begin
When all the timer recordings are completed, the unit
will rewind to the beginning of the recorded program(s).
NOTE:
•
If you press [POWER] while tape is rewinding,
the Auto Return will stop.
4 Watch the recorded program
Press [PLAY/
KK
].
TO CANCEL THE AUTO RETURN MODE
Repeat steps 1 to 2 and select [OFF] using
[REW/
ss
] or [F.FWD/
BB
].
Even if there is a power failure of any kind, the
unit will retain its memory for this feature.
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
B USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
–
USER’S SET UP
–
RENTAL [OFF]
REPEAT PLAY [OFF]
B AUTO RETURN [ON]
TIMER PROGRAM EXTENSION
To shift the time schedule of an automatic timer recording.
1)Press [POWER].
2)Repeat step
1
on page 23.
3)Press [RECORD] and select the desired program
using [PLAY/
KK
] or [STOP/
LL
].
4)Press [RECORD] again.
Each additional press will shift forward the begin/end
time for recording by 10 minutes. When the recording
is already in progress, each additional push will shift
forward the end time only. If you want to cancel while
setting, press [PAUSE/STILL F] on the remote con-
trol. The recording time returns to the original time.
NOTE:
•
When you shift forward the time schedule during
recording, the recording speed will automatically
be set to the SLP mode.
5)
Press [REW/
ss
] or [F.FWD/
BB
] to exit the setting
menu. Then press [MENU] to return to original
mode.
TO CORRECT A PROGRAM
•
While setting a program; press [REW/
ss
] to go
back one step and enter the correct numbers using
[PLAY/
KK
] or [STOP/
LL
].
•
After setting a program;
1)Press [POWER].
2)Repeat steps 1 to 2 on page 23.
3)
Press [F.FWD/
BB
] (or press [REW/
ss
] to go back one
step) until the part you want to correct begins flashing,
then make the changes using [PLAY/
KK
] or [STOP/
LL
].
8 Set end minute
Press [PLAY/
KK
] or [STOP/
LL
]
until the desired minute appears.
(Example: “50” for 8:50PM)
Then press [F.FWD/
BB
].
9 Set the tape speed
Press [PLAY/
KK
] or [STOP/
LL
]
until the desired tape speed
appears. (Example: “SP”)
10 Finish setting the program
Press [F.FWD/
BB
] to complete setting.
•
To set another program, repeat steps 2 to 10.
•
Press [MENU] to exit the menu.
11 Set the timer
Press [POWER] to set automatic timer recording.
The recording indicator lights up.
•
You must turn off the unit to activate automatic
timer recording.
If power is not turned off and you continue watching
TV, “TIMER REC STANDBY” starts flashing on the
TV screen 2 minutes before the programmed start time.
•
If the erase-prevention tab is removed, the cassette
will be ejected when [POWER] is pressed to off.
– TIMER PROGRAMMING –
CH DATE BEGIN END
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
B
61 7/04 MON 7:30
P
M
8:50
P
M
- -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
– TIMER PROGRAMMING –
CH DATE BEGIN END
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
B
61 7/04 MON 7:30
P
M 8:50
P
MSP
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
4)Press [POWER] to set automatic timer record-
ing.
TO CANCEL AN AUTOMATIC TIMER
RECORDING
1)Press [POWER].
2)
If recording is in progress, press [STOP/EJECT
PP NN
]
on the unit.
3)Repeat steps
1
to
2
on page 23 and select a pro-
gram you want to cancel.
4)Press [T-PROG. CLEAR].
5)Press [MENU] to return to TV mode.
TO CONFIRM THE TIMER SETTING
1)Press [POWER] so that the Recording indicator
light goes off.
2)Press [MENU].
3)Confirm “TIMER PROGRAMMING” is selected.
4)Press
[F.FWD/
BB
]. The details of programs appear
on the TV screen.
5)Press [MENU] to return to TV mode.
NOTES:
•
The display will not be turned on automatically
at the time the programmed recording begins.
•
If the tape runs out before the end time, the unit
will switch to the stop mode immediately and
the tape will be ejected.