Tech Craft BWS250M TV Video Accessories User Manual


 
Model/Modèle/Modelo
BWS250M
00.R1
IMPORTANT CUSTOMER SERVICE INFORMATION / IMPORTANT INFORMATION DE NOTRE SERVICE À LA CLIENTÈLE /
INFORMACIÓN IMPORTANTE SOBRE SERVICIO ALCLIENTE INCLUIDA
Thank you for you purchase of this product.
To enhance you purchase and secure your warranty,
please review these important notes.
NOTES ON CUSTOMER SERVICE & PARTS
Please examine ALLpackaging materials before discarding.
Shortages can occur by leaving parts in the packing material.
If any parts are missing or damaged, please review the parts
LIST found in the Assembly Manual, identify the missing or
damaged part, and go to
www.techcraft.net
Please have the following information ready when you call:
1) The model number of the product (found on the cover of the
Assembly Manual or on the back panel label)
2) The name and address of the location where you purchased
this product
3) The Seven-Digit Production Job number (found either on the
back panel or on the shipping box)
4) The Serial Number of the product (if there is one) which can
also be found on the back panel label
5) Alist of the part numbers of missing or damaged parts.
Merci d’avoir acheté un de nos produits.
Pour améliorer votre achat et sécurisé votre garantie,
veuillez lire attentivement ces notes.
À PROPOS DU SERVICE À LACILENTÈLE:
S.V.P. Bien regarder à l’intérieur de l’emballage,AVANT DE LE
JETTER OU DE LE RECYCLER. Il se pourrait qu’il reste encore
des pièces requises pour l’assemblage. Si, par erreur, une pièce
serait manquante ou défectueuse, prière de l’identifier avec
votre manuel d’instruction, et d’aller sur
www.techcraft.net
Avant d’appeler, ayez à la portée de la main les informations suivantes:
1) Le numéro de modèle du produit (situé sur la page couverture de
votre manuel d’instruction ou sur l’étiquette à l’arrière du meuble.
2) Le nom et l’adresse de l’endroit où le produit a été acheté.
3) Le numéro de code “Job #” à sept (7) chiffres (situé sur l’étiquette à
l’arrière ou sur le carton d’emballage).
4) Le numéro de série indiqué sur l’étiquette à l’arrière du meuble ou sur
le carton d’emballage (s’il y a lieu).
5) La ou les numéro(s) de pièce endommagée ou manquante.
Gracias por la compra de este producto.
Para mejorar su compra y asegurar su garantia,
por favor revise estas notas importantes.
NOTAS SOBRE PIEZAS Y SERVICIOALA CLIENTELA:
Por favor, examine TODOS los materiales de empaque antes de
destruirlos. La falta de piezas puede ocurrir si se dejan dentro del
material de empaque que se encuentra en el manual de instrucciones,
identifique la pieza dañada ò que hace falta y vaya a
www.techcraft.net
Cuando Ilame, por favor tenga listas las informaciones siguientes:
1) El Número de Modelo del producto (se encuentra en la portada
del manual de instrucciones ò en la caja de cartón.
2) El nombre y dirección del lugar donde compró este producto.
3) Los siete digitos del numero de producción (se encuentra ya sea
en la etiqueta del panel trasero del mueble ò en la caja de carton).
4) El Número de Serie del producto (si lo hay) que también se puede
encontrar en la etiqueta del panel trasero del mueble.
5) Una lista de los números de las piezas dañadas ò faltantes.
DO NOT LIFT BY GLASS.
ALWAYS USE THE METALORWOOD PARTSTO LIFT
OR MOVE THE UNIT.
TOUJOURS DÉPLACER OU SOULEVER LE MEUBLE EN
SIEMPRE MOVER O LEVANTARELMUEBLE UTILIZANDO
ATENCION:
CAUTION:
NE PAS SOULEVER PAR LES VITRES.
ATTENTION:
NO LEVANTARPAR LAS VIDRIOS.
UTILISANT LES PIÈCES EN MÉTALOU EN BOIS.
LAS PARTES EN METAL O EN MADERA.