The Singing Machine STVG-535 Flat Panel Television User Manual


 
E17
TROUBLE SHOOTING GUIDE
No song lyrics appear
on the TV screen.
Connect the video cable to the
Singing Machine’s VIDEO OUT
and totheTV VIDEOIN.
Using your TV Remote to select
VIDEO input.
Connect from VIDEO OUT of the
system to the VIDEO IN of your
VCR or Connect to an RF
Modulator and then to the TV
cable input. Refer to “Making the
Connections” on page E7.
Check the disc to be sure it is a
CDG.
Video cable is not connected
properly totheTV.
Source selector on TV is not
set to VIDEO.
Check disc to be sure it is clean.
(See page E15 for cleaning
instructions.)
A CDG is loaded but the
CDG indicator is not lit.
TV does not have video line
input.
CASSETTE
Unsteady tape sound.
Cannot record.
Recorded tape sound
is distorted.
Dirty capstan.
Irregular cassette tape
winding.
Pitch control may be in
wrong position.
The erasure prevention tabs
are broken out.
Play button and Record
button were not pressed
down simultaneously.
Dirty head.
Faulty cassette tape.
Clean capstan.
Replace tape.
Adjust Pitch control.
Replace tape or cover tab
openings with adhesive tape.
When recording, make sure that
both the Record and Play buttons
are presseddown atthe sametime.
Clean capstan.
Replace tape.
SOLUTION
PROBLEM
POSSIBLE CAUSE
Follow directions on page E7 for
‘Video Connection’.
No sound - If audio is
going through TV or
VCR.
Source Selection on TV or
VCR is not correct.
VERTICAL HOLD Control is
not set correctly.
Adjust the VERTICAL HOLD
Control.
Picture is jumping up
and down.
ENGLISH