Technicolor - Thomson 21MF10C Universal Remote User Manual


 
2
Connections
The mains socket (1) is for supplying the TV
set with power.
This TV set is suitable for use on A.C. mains
supply, 220-240 V - 50 Hz only.
It must not be connected to D.C. mains.
Do NOT under any circumstances plug the
severed plug into any mains socket as this
could result in electric shock.
The aerial socket (2) is for connecting an
external antenna or equipment fitted with a
modulator (VCR, satellite receiver, etc.).
When connecting additional equipment to the
aerial socket, you must assign a channel
number to it. To do so, switch the external
equipment on, then search for its modulator
channel on the TV set, assign the channel
number found to the equipment (for SECAM
VCR's, select channel number 99) and store.
From now on, every time you want to use the
external equipment connected, you must
select the channel number assigned to it.
VCR's without an integrated modulator do
not require this setting.
The SCART socket (3) enables you to
connect a VCR or camcorder (VHS, 8 mm,
S-VHS or Hi-8), Canal+ decoder
or videogame console.
The type of connection shown on the opposite
is highly recommended, given that it provides
improved picture quality.
To operate the external equipment connected,
you must select its AV socket by means of the
av
key. With certain equipment, selection of
proper AV socket is performed automatically.
When connecting an S-Video equipment,
make sure you press the
av
key twice.
The Audio/Video sockets (4*) allow you to
connect a VHS- or 8 mm-camcorder. To
visualise the pictures from the camcorder,
select the proper socket with the
av
key.
To prevent the picture and sound quality from
deterioration, you should avoid switching on
simultaneously two external appliances
connected via the SCART and the
Audio/Video sockets (4).
The headphone socket (4*) is for connecting
head- or earphones.
4
1
220 / 240 V~
Continental
Europe
3
2
A fused plug must be fitted with a 5Afuse approved by
ASTRAor BSI to BS 1362 and fuse covers must
always be securely replaced.
If you TV set does not work, the fuse may be blown.
Note : The mains lead of the TV set is fitted with a
moulded plug. Because it contains safety components
we cannot recommend re-wiring.
5A
United Kingdom
* If included.