Technicolor - Thomson TU-HDT104A DVR User Manual


 
Operating Instruction Book
TU-HDT104A
8
Mode C (SD, TV/CVBS)
Connect the CVBS composite video
output socket on your digital receiver to
your TV’s CVBS video input socket.
Connect the S-Video (Y/C) component
video output socket on your receiver to
your TV’s S-Video input socket. (Refer
to D)
Note: Cable is not supplied.
Note: When unit is in Mode C, there is
no output from the YPbPr sockets.
Audio Connections
If your display device is equipped with
Dolby Digital and/or MPEG audio decoding
capability, you may connect the Digital
Audio output of your digital receiver to the
display device’s Digital Audio input using
either the Optical or Coaxial RCA socket.
(Refer to E) You may also connect the
digital audio output to your A/V receiver if it
is capable of decoding a Dolby Digital /
MPEG digital audio stream.
Note: Cable is not supplied.
If your display device and/or A/V receiver
does not support Dolby Digital / MPEG
decoding, you will need to connect the L/R
Audio output RCA sockets on your digital
receiver to the stereo L/R Audio inputs of
your display device and/or A/V receiver.
(Refer to F). If your A/V receiver supports
Dolby Pro Logic decoder, you can switch
ON the “Downmix-Surround” function
(Page 21).
(D) CVBS / S-Video Connection
(E) Digital Audio Connection
(F) Analogue Audio Connection