Filter
Top Products
- 24 -
Video inputs
Composite video or sync:
Pin 20 (pin 17 return).
RGB:
Red–Pin 15 (pin 13 return).
Green–Pin 11(pin 9 return).
Blue–Pin 7 (pin 5 return).
Video output
Composite video:
Pin 19 (pin 17 return).
Audio inputs
A–Pin 6 (pin 4 return).
B–Pin 2 (pin 4 return).
Audio outputs
A–Pin 3 (pin 4 return).
B–Pin 1 (pin 4 return).
Fast blanking (input)
Pin 16, + 1V to +3V for fast blanking
switching, 75Ω.
NOTE: if an unsynchronised TV picture
results after viewing an external source
(with a fast blanking signal) connected to
AV, this voltage must be removed to return
to TV mode.
Signal selection
Facilities are provided for automatic
switching when the equipment connected
provides switching voltages as follows:
Pin 8: +9.5V to +12V
- Auto switching to auxiliary O/AUX
channel.
Pin 16: + 1V to + 3V–Auto switching to
RGB.
Signal levels
Composite video (in/out): 1 Vp-p ±3dB,
positive going, 75Ω.
Sync: 0.3Vp-p–3dB + 1OdB, negative
going, 75Ω.
RGB (input): 0.7Vp-p ±3dB, positive
going, 75Ω.
Audio (in/out): 0.5V r.m.s. (nominal)
Input impedance: ≥10 kΩ (20Hz–20kHz)
Output impedance: ≤ 1 kΩ (20Hz
–20kHz).
SCART socket connections
The socket is shown as viewed from the
rear of the TV.
1 5 9 13 17 21
3 7 11 15 19
4 8 12 16 20
2 6 10 14 18
The descriptions and characteristics given here are of informative signifiance only, and non
committal. In fact, to keep up the high quality of our products, we reserve the right to make changes
or improvements without previous notice.
PERITELEVISION (SCART) PIN CONNECTIONS
T 5173 GF/V 51 NB GB 8/10/1997 11:09 Page 24