Filter
Top Products
Function setup
60
DRC : Off
QSound : On
Menu : English
Subtitle : English
Audio : English
E.B.L. : Off
TV Screen : 4:3
Display : On
Picture Mode : Auto
JPEG Interval : 5 Seconds
Screen Saver : On
Parental : Off
Password : Change
DivX(R) VOD : Display
Parental control setting
Some discs are specifi
ed as not suitable for children.
Such discs can be limited not to playback with the unit.
1) Press
or to select “Parental”, then press
ENTER. “Enter Password” screen will appear.
2) Press “0000” using Number buttons (0–9).
(Please note, this is pre-setting password of this
unit). Then press ENTER. The parental level list
will appear.
• Level Off: The parental control setting does not
function.
• Level 8: Virtually all DVD software can be
played back.
• Level 1: DVD software for adults cannot be
played back.
3) Press
or to select from the level 1 to level 8.
The limitation will be more severe as the level
number is lower. Then press ENTER.
Note:
• Depending on the discs, the unit cannot limit
playback.
• Some discs may not be encoded with specifi c rating
level information though its disc jacket says “adult.”
For those discs, the age restriction will not work.
• The password is required every time when you
change the parental level.
• If you input a wrong number, press EXIT/CANCEL.
Setting details (continued)
Note:
• If each setup (pages
58
~
60
) has completed, the unit
can always work under the same condition (especially with
DVD discs).
Each setup will be retained in the memory even if you turn
the power off.
■ Set the new password
1) Press
or to select “Password”, then press
ENTER. “Enter Current Password” screen will
appear.
2) Press Number buttons (0–9) to input the current
password (If the password has not been set yet
after you purchase this unit, it is “0000”).
3) Then press ENTER. “Enter New Password” screen
will appear. Press Number buttons (0–9) to input
the new password.
4) Press ENTER. Now your new password has been
set. Be sure to remember this number!
If you forget the password
1) Press EJECT to remove the disc.
2) While holding 7 down on the remote control and
then press STOP on the unit. “Password Clear”
appears on the screen. Now the password
has been returned to the initial value (“0000”).
■ DivX
®
VOD
In order to play DivX
®
VOD (Video On Demand) content
on this unit, you fi rst need to register the unit with your
DivX
®
VOD content provider. You do this by generating
a DivX
®
VOD registration code, which you submit to
your provider.
Press
or to select “DivX(R) VOD”. Then press
ENTER. Your 8-character registration code is
displayed. Make a note of the code as you will need
it when you register with a DivX
®
VOD provider.
Then press ENTER to select Done.
Customizing the function settings (Continued)
50S0301A.indb 6050S0301A.indb 60 2/5/08 5:59:22 PM2/5/08 5:59:22 PM