Filter
Top Products
36
HM117 (E/F) Web 213:276
Chapter 5: Setting up your TV
Viewing the system status
To view the system status:
1 Press Y and open the Setup menu.
2 Highlight Installation and press T .
3 A new set of Installation menu icons will appear, as shown
below. Open the System Status menu, highlight
System Information, and press T.
4 Press C c to scroll through the menu bar to select the
Software Version and view the related information.
To close the screen and return to the Installation
menu:
Highlight Done and press T.
To return to normal viewing:
Press O.
Reset Factory Defaults
To reset all settings and channels to their factory
default values:
1 Press Y and open the Setup menu.
2 Highlight Installation and press T . A new set of
Installation menu icons will appear.
3 Open the System Status menu, highlight System
Information, and press T.
4 Press C c to scroll through the menu bar to select
Factory Defaults.
5 Enter your PIN code (or 0000 if no PIN code has been set).
6 Highlight Yes and press T. The TV will turn off
automatically after a few seconds. After the TV turns off,
unplug the TV power cord and then plug it in again to
complete the reset process.
To cancel the reset:
Highlight No and press T.
System Information
System Status
Installation
System Information
Done
3.2.21.0
Nov 17 2006 - 01:52:20
HM07
FW: 0B
Software Version
System Information
Done
This window provides the ability to reset the TV
settings.Type in your PIN now (or "0000" if no
PIN has been set) to restore settings to their
factory default values.
Factory Defaults
System Information
Press YES to confirm. After the TV
turns off, unplug it and plug it back
in to complete the reset.
YesNo
57HM117_EN.book Page 36 Friday, March 23, 2007 9:48 AM
Downloaded from www.Manualslib.com manuals search engine