Filter
Top Products
101EN 101EN
Disc
Management
Recording PlaybackIntroduction Connections Basic Setup Editing Function Setup
VCR Function
Others
VCR FUNCTIONS
One-touch Timer Recording (OTR) Index Search
This feature allows you to set the recording length simply
by pressing [REC I] on the remote control.
Press [VCR] first.
1) During normal recording, press [REC I] to begin
the one-touch timer recording.
You can select a fixed recording time by pressing
[REC I] repeatedly.
(0:30) (1:00)
(Normal recording)
(7:30)(8:00)
When the one-touch timer recording is finished, the
unit will turn off automatically.
To change the recording length during the one-touch
timer recording, press [REC I] repeatedly until the
desired length appear.
To cancel the one-touch timer recording within the
specified time, press [STOP C].
Note
• The remaining recording time will be displayed on
the front panel display during one-touch timer
recording. Press [DISPLAY] to see it on the TV screen.
• You cannot pause the one-touch timer recording.
• If VCR the one-touch timer recording is completed
during DVD playback or recording, the VCR will be in
stop mode and the DVD keeps the current mode.
• Unlike a timer recording, you can perform the
following operations during the one-touch timer
recording.
- Turning off the power (One-touch timer recording
will be canceled.).
- Using [REC I] or [STOP C].
• When the one-touch timer recording is finished and
the power is turned off, the unit will switch to the
standby mode automatically if a timer recording has
been programmed. Press [TIMER SET] to cancel the
standby mode for using the unit continuously.
• This function is available only when the unit is
connected by the VIDEO OUT jack.
An index mark will be assigned at the beginning of each
recording you make. You may skip to a specific marked
point by following the steps below.
Press [VCR] first.
1) Press [SEARCH] so that “INDEX SEARCH” menu
appears.
2) Using [the Number buttons], enter the number of
recordings you wish to skip within 30 seconds.
INDEX SEARCH
03
3) Press [REV E], [FWD D] to start index search.
If you want to go in the forward direction, press
[FWD D].
If you want to go in the reverse direction, press
[REV E].
After index search, the VCR will play back the cassette
tape automatically.
Pro.1 Pro.2 Pro.3 Pro.4 Pro.5
02 01 01 02 03
Beginning
of tape
End
of tape
CURRENT PROGRAM
INDEX MARK
Note
• You can make the index mark up to 20.
• This function is available only when the unit is
connected by the VIDEO OUT jack.
E9PKAUD_DVR620KU_EN.indd 101E9PKAUD_DVR620KU_EN.indd 101 3/25/2009 3:49:09 PM3/25/2009 3:49:09 PM