Open as PDF
Manual clock setting
You must set the date and time manually for timer recordings,
ON/OFF timer and daylight saving time if the auto clock
process did not set them correctly.
After a power failure or disconnection of the power, the timer
settings will be lost. In this case, reset the present time.
• When you set the minute, you can change in 10-minutes step
by holding down or .
Press MENU, then press
or to select
EXAMPLE: Setting the clock to “8:30 AM”, 27th. (SAT)
After setting the clock, date and time starts
Press or to select “CLOCK SET”, then
Press or to set the month, then press .
Set the day, year and time as in step 4, then
To make corrections any time during the process
Press or repeatedly until the item you want to
change blinks, then set the item again.
5L00201C [E]p18-21 20/4/04, 16:0521