Open as PDF
One-touch Timer Recording
The One-touch timer recording feature provides a simple and
convenient way to make a timed recording.
One-touch timer recording (OTR)
Load a cassette tape with the erase
prevention tab intact.
The unit will automatically turn on.
Example: One-touch timer recording for 30 minutes.
Press SP/SLP to select the desired tape speed
SP or SLP.
The tape counter and SP or SLP will
appear on the screen for about 4
Set “TV” or “CABLE” option to the appropriate
OTR 0 : 30
TV - VHF/UHF channels
CABLE - Cable TV channels
Press Direct channel selection
/ to select the channel to be recorded.
Press both REC at the same time to begin
recording. Press the buttons again to stop
recording after 30 minutes. Each additional
press of REC will increase recording time as
shown below, up to a maximum of 6 hours.
“OTR” will appear on the screen.
“ ” will appear on screen for about 4 seconds.
• If you wish to watch the DVD playback during the recording
or the OTR, press the DVD button to change to DVD mode and
perform the DVD playback
• The channel cannot be changed during recording.
To cancel OTR
5L00201C [E]p38-41 20/4/04, 16:0739