Toshiba MW27FP1 TV DVD Combo User Manual


 
42
Other functions (VCR)
LINE 1 IN
VIDEO
AUDIO
L
(MONO)
R
VIDEO
AUDIO
L
R
OUT PUT
DIGITAL AUDIO
VHF/UHF
COAXIAL
To AUDIO (R) IN
To AUDIO (L) OUT
Audio/Video cable (not supplied)
Playback VCR
To VIDEO OUT To AUDIO (R) OUT
Recording VCR
Duplicating a video tape
If you connect the unit to another VCR or Camcorder, you can
duplicate a previously recorded tape. Make all connections before
turning on the power.
Duplicating a video tape
For duplicating a previously recorded tape from a
camcorder, follow the camcorder manufacturer’s
instructions. A typical camcorder dubbing hookup is
shown above.
Audio/Video cable (not supplied)
To AUDIO (R) IN
To AUDIO (L) IN
To VIDEO IN
Recording VCR
To AV Jack
Playback Camcorder
Connection with Camcorder
Select “LINE2” on step 2.
Press SP/SLP to select the desired tape speed
SP or SLP.
It is recommended that you set the
Speed to the SP mode on the
recording VCR for best results.
1
Press INPUT SELECT once or twice to select
AUDIO/VIDEO input position.
“LINE1” or “LINE2” will appear on the
screen.
2
Press PLAY on the playback VCR or camcorder.
3
Press both REC at the same time.
4
Press STOP after duplicating a video tape.
5
LINE1: on the rear panel
LINE2: on the front panel
Preparation:
•Press TV/VCR to select the TV/VCR mode.
Load a cassette tape with the erase prevention tab
intact.
Load a previously recorded tape into the playback
VCR or Camcorder.
LINE1
To VIDEO IN
To AUDIO (L) IN
SP/SLP
RETURN
INPUT
SELECT
ZOOM
Note:
Unauthorized recording of copyrighted television programs, films,
video cassettes and other materials may infringe the rights of
copyright owners and be contrary to copyright laws.
REC
3
TV/VCR
2
1
Connection with second video recorder
Select “LINE1” on step 2.
Illustration of
MW20FP1
STOP
STOP
5L00201C [E]p42-43 20/4/04, 16:0742