Filter
Top Products
VIZIOE320VPUserManual
TVSpeakers
Turn the internal speakers On or Off. You may want to turn the internal speakers off when listening to the
audio through your Home Theater System.
Advanced Audio
To select the options in the Advanced Audio sub-menu, press •. A new menu will be displayed showing
the advanced functions available for fine tuning of the audio.
SRS TruSurround HD
This option sets the SRS True Surround HD surround sound
process. Choose from On or Off.
Note: When SRS TruSurround HD is On, Equalizer adjustments
are not available.
SRS TruVolume
When the programming switches to a commercial or when
changing from channel to channel, volume fluctuations occur.
When set to On, SRS TruVolume t'' provides the listener with a
comfortable and consistent volume level. Turn this option Off when
listening to music.
Digital Audio Out
This option allows selection of the type of processing for the
S/PDIF (Optical connector) when used with a
Receiver/Amplifier/Home Theater system. Select to choose from
OFF, Dolby Digital or PCM.
Analog Audio Out
This option sets the volume control properties when using the RCA (white and red) connectors as
audio line out to connect a Receiver/Amplifier/Home Theater system. Choose from Fixed or
Variable. When set to Variable, volume from the external speakers will change according to the
volume setting on the TV. If it is set to Fixed, the volume can only be changed by the settings on
the external stereo system.
Equalizer Settings
To select the options in the Equalizer sub-menu, press OK. A new menu
will be displayed showing the volumes of different frequencies.
Starting from lowest to the highest, they are 120Hz, 500Hz, 1.5KHz, 5KHz
and 10KHz.
1. Press 4 or • to select the frequency to be adjusted.
2. Use • or • to adjust the selected frequency to your preference.
Values above 0 will boost the frequency and values below 0 will
attenuate the frequency.
Note: The Equalizer adjustment will only be available when SRS TSHD is
set to Off.
Reset Audio Mode
Return all Audio settings to factory default. A screen will come up to
confirm your selection or to cancel it. Press 4 or • to make the selection,
and then press OK to accept it.
Note: Only settings under the Audio menu will be reset.
34
www.VlZlO.com