Filter
Top Products
SUMMIT
®
BUILT - IN GAS GRILL DIMENSIONS
THIS GAS APPLIANCE IS DESIGNED FOR
OUTDOOR USE ONLY.
LOCATING YOUR GRILL
When determining a suitable location for your Summit
®
gas grill installation, give attention to concerns such as exposure
to wind, proximity to trafc paths, and keeping any gas supply lines as short as possible. Never locate the Summit
®
gas
grill in a garage, breezeway, shed, under an unprotected overhang, or other enclosed area. Locate the grill and structure
so there is enough room to safely evacuate the area in case of a re.
CLEARANCE FROM SURFACES OR STRUCTURES
WARNING: Clearance from any surface or structure
is 24 inches from the back and sides of the grill. Refer
to “Typical Gas Supply Installation” before starting
installation.
WARNING: The structure, “island”, countertops, and
adjacent work areas for the built-in grill installation
must be built from non-combustable materials only.
NOTE: If you have questions on what materials are
considered non-combustable, contact you local
building materials supplier or re department.
Any Surface
Any Surface
24 inches Any Surface
24 inches
24 inches
Grill Frame
Note: For a countertop treatment: Recommended 3/4 inch
ov
erhang. Notch front edge for frame to fully slide in.
27 inches min. for lid clearance
BUILT-IN STRUCTURE CUTOUT DIMENSIONS
ALL DIMENSIONS ARE TO FINISHED SURFACES.
Built-In Cutout Dimensions
27" Grill 39" Grill Tolerances
A
30
1
/
4
" 38
1
/
4
" +
1
/
4
" -
1
/
4
"
B
34
1
/
4
" 34
1
/
4
" +
1
/
4
" -
1
/
4
"
C
21" 21" +
1
/
4
" -
1
/
4
"
WARNING: ALL COUNTERTOP FINISHED SURFACES
MUST BE CONSTRUCTED OF A NONCOMBUSTIBLE
MATERIAL.
SILVER A - SILVER D - GOLD D