Filter
Top Products
56
Power
PLAYING A DISC
(1) Press POWER on the unit or on the remote control to turn on the unit.
Every time you press POWER, the TV/DVD will starts from previous mode.
(2) Press DVD on the remote control to select DVD mode.
The DVD startup screen will appear on the screen.
(If DVD disc has already loaded, playback will start automatically.)
(3) Load the disc in the disc slot.
Load the disc in the disc slot with the label side facing upward. (If the disc has a label.)
Hold the disc without touching either of its surfaces, align it with the guides, and place it in position.
When you play the 8cm disc, you need an adapter (not supplied),or you will damage the DVD
player.
(4) On the TV-screen, “READ” will appear on the upper left side and playback commences.
A menu screen will appear on the TV screen, if the disc has a menu feature.
Press ►/ ◄ or ▲ / ▼ to select title, then press ENTER. Title is selected and play commences.
(5) Press STOP to end playback.
The unit records the stopped point, depending on the disc. “► ”appears on the screen.
Press ► PLAY to resume playback from the scene point.
If you press STOP again (“ ” appears on the screen.), the unit will clear the stopped point.
(6) Press ▲ EJECT to remove the disc.
DVD
EJECT
►Note:
If a non-compatible disc is loaded, “READ” changes to “■” will appear on the screen. In this case, check your
disc again (see pages 7).
Some discs may take a minute or so to start playback.
When you set a single-faced disc label downwards (ie. The wrong way up), “READ” will appear on the display for
several seconds and then “NO IDSC” appears on the screen and eject the disc automatically.
Some discs may not work the resuming facility.
Some playback operations of DVDs may be intentionally fi xed by software producers. Since this unit plays DVDs
according to the disc contents the software producers designed, some playback features may not be available.
Also refer to the instructions supplied with the DVDs.
1.PLAYBACK PROCEDURE