Yamaha MCR-E810 DVD Player User Manual


 
45 En
English
OTHER
OPERATIONS
You can turn on/off the auto-standby feature which automatically set the system to the standby mode if you do not
operate the system for 30 minutes while the receiver is set to the DVD/CD input mode. (The default setting is “AUTO
STANDBY ON”.)
Unless you connect the receiver and the DVD player properly with the supplied system control cable (see page 12), this feature does
not function for the system.
This feature does not function for the system during playback.
1 Rotate INPUT on the front panel of the
receiver to select “DVD/CD” as an input
source.
2 Press MEMORY.
The current setting appears in the receiver’s front
panel display for about five seconds.
3 While the current setting is displayed in the
front panel display, press u or d to switch
between “AUTO STANDBY ON” or “AUTO
STANDBY OFF”.
4 Press MEMORY or wait for five seconds
without any operation to confirm the setting.
Setting the auto-standby mode
Notes
MIN MAX
VOLU ME
INPUT
BALANCE
LR
TREBLEBASS
PHONES
STANDBY/ON
TIMER
DISPLAY MEMORY
NATURAL SOUND STEREO RECEIVER RX-E810
PRESET/BAND
PRESET/TUNING
PURE DIRECT
HOURTIMER
TIME ADJ
MIN
AUTO/MAN'L
u / d
MEMORY
INPUT