Filter
Top Products
26
Changing the driver setting (MIDI Patch Screen)
• Changing the device number
If you are using multiple UX256s, you can change the device number.
Click “Device Name.” The System displays the drop-down list. Select the device for
which you wish to change the setting.
If you are using a Macintosh computer, the device number is assigned
sequentially, such as “USB1,” “USB2,” etc., as the Device Name.
• Checking the signal path
To see if the MIDI device is connected correctly, you can try transmitting MIDI signals.
• Note Off Message
When you click [Send All Note OFF], a MIDI All Note Off message will be sent to all
ports on the UX256.
• Note On Message
When you click [Send All Note On], a MIDI All Note On message will be sent to all
ports on the UX256.
NOTE