1. Manuals
  2. TV and Video Support
  3. Bose Support
  4. Universal Remote Support
Support User Manuals
Question About Bose Universal Remote None
I bought at auction pilot bare RC35T-L not working...

I bought at auction pilot bare RC35T-L not working, the display is an LCD information / no signal / what I do, reset the setup lack of communication the console V35 Please advice

Asked by Janusz on 01/04/2014 1  Answer

ManualsOnline posted an answer 10 years, 10 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

Pablo posted an answer 8 years, 4 months ago

0 Resetting the system 1. Press and hold the power button on the control console for 5 seconds or until the power light on the control console changes to red. The power light on the control console changes to red when the system shuts down. 2. Press and release the power button on the control console to restart the system. The power light changes to blinking green and then solid green when the system is on and ready to use. 3. If you still cannot operate the system using the remote, try the next procedure to pair the remote with the control console. Pairing the remote with the console You may need to perform this procedure if you are replacing a remote or if troubleshooting instructions recommend it. 1. Make sure your system is on. If not, press the power button on the control console. 2. Hold the remote close to the control console. 3. Press and hold both the Mute button ( ) on the control console and the OK button on the remote at the same time for five seconds. The power light blinks when pairing is complete. 4. Press any remote button and verify that the power light on the control console blinks with each button press. Performing a system software update System software updates are available periodically and can be downloaded over the Internet to the USB drive included with your system. 1. Press the Setup button on the front of the control console to display the UNIFY® menu. 2. Using the remote navigation buttons, select Update. 3. Follow the instructions on the screen.
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.
Ask a Question Request a Manual