1 Set the VCR's input to tuner. To do this, press INPUT on the remote control until a channel number appears on the screen or on the front panel display.

2 Press MENU on the remote control. VCR Main Menu comes up. If First Time Set-Up is not highlighted, use the ADJUST buttons on the remote to highlight it.

3 Press ENTER. First Time Set-Up menu will appear. Press the ADJUST buttons to select Memorize channels. Press ENTER.

4 You will see the menu for sources connected to the VCR. Using the list below as a reference, press the ADJUST buttons to select the kind of antenna you connected.
*Cable if you are using any cable combination, including a cable box with an A/B switch.
*Indoor/outdoor ant. if you use rabbit ears type or roof mounted type of antennas.
After you have selected, press ENTER.

5 An on-screen message and the front panel display of your VCR will show you that the VCR is memorizing the stations you can receive. You can cancel the memorization at any time by pressing CANCEL. After the VCR has programmed all the channels, the screen will return the VCR's picture.

Hope this was what you were looking for.