1. Manuals
  2. TV and Video Support
  3. One for All Support
  4. Universal Remote Support
Support User Manuals
Question About One for All Universal Remote CURC4110
How to program channels on one for all CURC4410 re...

How to program channels on one for all CURC4410 remote Phillips TV 39PFL2708//F7

Asked by Delores on 01/30/2014 2  Answers

ManualsOnline posted an answer 10 years, 2 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

Rewarder User posted an answer 10 years, 1 month ago

5 1. Turn on a desired device (e.g., VCR or DVD player) and, if applicable, insert media (e.g., cassette or disc). NOTE: Please read steps 2 through 4 completely before proceeding. Highlight or write down the codes and device you wish to program before starting step 2. 2. On the remote control, press a device key once (i.e., VCR, DVD, CBL/SAT (DTC), or TV). NOTES: • To program control of a VCR, PVR (or DVR), TV/VCR Combo, or TV/VCR/DVD Player Combo press VCR once. After programming a VCR Combo device, you will be able to control channel selection, volume, and VCR functions. • To program control of a DVD Player, DVD Player/ VCR Combo, or TV/DVD Player Combo, press DVD once. After programming a DVD Combo device, you will be able to control channel selection, volume, and DVD functions. • To program control of a Cable Box, Cable Box/PVR (or DVR) Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR) Combo, press CBL/SAT (DTC) once. 3. Press and hold SET until the LED (red light) blinks twice, then release SET. 4. Use the accompanying code list to locate the type of device and brand name and then enter the first four-digit code for your device. If performed correctly, the LED will blink twice. NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter the same code again. 5. Aim the remote control at the device and press PWR (Power) once. The device should turn off. If it does not, repeat steps 2 through 5, trying each code for your brand until you find one that works. If it still doesn’t work, try Searching For Your Code on next page. NOTE: If the device does not have a Power key, press PLAY.6 Searching For Your Code If your device does not respond to the remote control after trying all codes listed for your brand, or if your brand is not listed at all, try searching for your code. NOTE: Before performing a code search for a DVD player or a VCR, turn on the device and insert the required media. For example, to search for a code for your TV: 1. On the remote control, press TV once. 2. Press and hold SET until the LED (red light) blinks twice, then release SET. 3. Enter 9 - 9 - 1. The LED will blink twice. 4. Aim the remote control at the TV and slowly alternate between pressing PWR (Power) and TV. Stop when the TV turns off (after pressing PWR). If the device does not have a Power key, you can substitute another function, such as digits 0 ~ 9, CH +, or PLAY). NOTE: In the search mode, the remote control sends IR codes from its library to the selected device, starting with the most popular code first. 5. To lock in the code, press and release SET. The LED will blink twice. 6. To search for the codes of your other devices, repeat steps 1 through 5, but substitute the appropriate device key for the device you are searching for. 6. Repeat steps 1 through 5 for each device you want to control. I have also attached the manual. Hope this solves your problem.
Was this answer helpful?

Noel posted an answer 9 years, 4 months ago

0 Useful? You bet it is for me who fool around about all concerning that 4110 remote control, until a find this pearl i was looking. I did not try anything yet, but with that brilliant idea to include the manual, i am sure it's the solution for my problem. I thank you so much! Noël C.
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.
Ask a Question Request a Manual