1. Manuals
  2. TV and Video Support
  3. Panasonic Support
  4. DVD Recorder Support
Support User Manuals
Question About Panasonic DVD Recorder DMR-EZ28
How do i set the clock...

How do i set the clock

Asked by angela on 02/22/2014 2  Answers

ManualsOnline posted an answer 10 years, 9 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

Rewarder User posted an answer 10 years, 7 months ago

5 1. Preparation: Turn on the television and select the appropriate video input to suit the connections to this unit (Example: AV input). These are the first settings you make upon buying the unit. You don’t need to make these settings again. to turn the unit on. “HELLO” appears on the unit’s display. When this unit is connected to a Panasonic TV (VIERA) supporting HDAVI Control 3 via an HDMI cable (➔ 11), it acquires the setting information from the TV. When the Quick Start Setting screen appears (➔ 14, step 1) Language: e, r to select, then When the Quick Start Setting screen appears after this step (➔ 14, step 1) TV Aspect Ratio: e, r to select “4:3 TV” or “16:9 Widescreen TV”, then Aspect Ratio Selection Select TV type and press OK. (Please refer to Operation Instruction for details) 4:3 TV 16:9 16:9 Widescreen TV 4:3 When connecting to a 4:3 standard aspect TV: Select “4:3 TV”. When connecting to a 16:9 wide Quick Start Function: e, r to select “On” or “Off”, then Automatic Clock and Channel Settings: e, r to select “Yes” or “No”, then When connecting the cable from the wall (cable TV or antenna) to the unit’s RF IN: Select “Yes”. The unit then displays the source selection screen (➔ 13). When not connecting the cable from the wall (cable TV or antenna) to the unit’s RF IN: Select “No”. The unit then displays “Set Clock Manually” screen (➔ 13, Manual Clock Setting). or,, The types of transmission: e, r to select “Antenna” or “Cable”, then to start automatic channel/ clock setting. Confirm the time, then DST (Daylight Saving Time) shows the summertime setting. Time Zone shows the time difference from Greenwich Mean Time (GMT). Tips If the unit displays “No channels were found.”, turn off the unit and confirm the cable or antenna input is connected to the RF IN terminal. Restart the set up again (➔ below). If “Auto Clock Setting is incomplete.” is displayed, press [OK] and set the clock manually (➔ right). If the clock is not correct, set the clock with “Adjust Time Zone” (➔ 49) or “Set Clock Manually” (➔ 49). You can delete channels you don’t need after completing Auto Channel Setting (➔ 46). Restarting the Auto-Setup (after relocation, for example) 1. When the unit is on and stopped, press and hold [CH 2] and [CH 1] on the main unit at the same time for about 5 seconds. The unit turns off. 2. Press [^ DVD POWER] to turn the unit on. (The signal source and channel captions revert to their default values. All scheduled recordings are cleared.) To cancel in the middle Press [RETURN]. Notes Conditions of the received channel may cause automatic channel/ clock setting to take extra time. i hope this will work for you.. :)
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.
Ask a Question Request a Manual