I'm needing the code for the remote Sony RM-V301 for a Hitachi T.V.

Asked by K Thompson on 09/03/2008 1  Answer

ManualsOnline posted an answer 16 years, 1 month ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here
0 003, 013, 032,031 Follow these steps to program the remote control. 1. Turn on the component to be programmed. 2. On the remote control, press the SET button. 3. Press the appropriate component button for the component being set up. 4. Using the number pad, enter the component's manufacturer code. NOTE: If more than one code number is listed for the manufacturer, repeat the procedure, entering one code at a time until you find one that works. 5. Press the ENT button. 6. Point the remote control at the component. 7. Press the POWER button to verify operation. NOTES: * If a new code number is entered, the code number previously entered will be erased. * When the batteries are replaced, the programmed codes may be erased. It may be necessary to reprogram the remote after replacing the batteries. * The operation of a combination deck of any kind is not guaranteed. * Some product functions may not be able to be controlled by the remote control. Use the remote control provided with the component. * If none of the codes listed for the manufacturer work, it may be necessary to try codes listed for other manufacturers or perform a search for the correct code. Consult the Operating Instructions provided with the remote control for steps on searching for the correct code. * In some rare cases, you may not be able to operate your non-Sony equipment with the supplied remote control. This is because your equipment may use a code that is not provided with this remote control. In this case, please use the equipment's own remote control.
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.