Connections
13
CABLE or ANTENNA
OUT
VIDEO
AUDIO
DIGITAL
INTERFACE
R
L MONO
REAR
IN
S-VIDEO
OVER
VCR
IN
OR
OR
VIDEO
AUDIO
DIGITAL
INTERFACE
R
L MONO
REAR
IN
S-VIDEO
OVER
1) Connect the antenna or cable TV wire from the wall outlet, in to the RF Input of the cable box.
2) Connect an RF cable from the RF Output of the cable box, in to the RF Input on the back of
the VCR.
3) Connect an RF cable from the RF Output of the VCR, in to the RF Input on the back of the TV.
4) Connect the yellow video cable out from the VCR’s Video Output, in to the TV’s Video Input
jack, OR connect an S-Video cable from the VCR’s S-Video output, to the TV’s S-Video input.
5) Connect the white audio cable out from the VCR’s Left Audio Output, in to the TV’s Left Audio
Input Jack.
6) Connect the red audio cable out from the VCR’s Right Audio Output, in to the TV’s Right
Audio Input jack.
• If your VCR is a mono sound unit, it will have only one Audio Out jack. Connect it to the TV’s
Left Audio Input.
• Please consult your VCR’s owner’s manual for more information on its operation.
Cable and VCR Connections - Continued
Diagram #2
Hotel IB 6/28/2001 10:13 AM Page 13
