16
3-3 Connecting the Rear Panel Input/Output Terminal Connections
[CAM SW OUT] camera switching signal output terminal
[ALARM IN] alarm signal input terminal
[ALARM RESET] alarm reset terminal
[ALARM REC OUT] alarm recording mode signal output terminal
[CLOCK RESET] clock reset terminal
5
When setting the clock to the first VCR
’s clock
5
When setting the clock to the external master clock
External interface example
Example: Lamp lights with HIGH signal
5
Use appropriately rated devices.
4 ON-SCREEN/MENU SWITCHES
4-1 On-Screen Display
Displays the time date (date and time), recording speed, number of alarms and number of power losses (power failures) on
screen in the Stop mode, Record mode and Record-Pause mode.
During recording, the on-screen data is recorded together with video signals.
• The on-screen display position can be moved with the [ON SCREEN] buttons.
• The type of data shown and display brightness can be selected on the <ON SCREEN /F. DISP MODE> screen.
[ON SCREEN t] button[ON SCREEN 7] button
Time (hour,
minute, second)
Date (month,
day, year)
Number of
alarms
Recording speed (ALARM
indication during alarm/
sensor recording)
Number of
power losses
(power
failures)
[ON SCREEN 7]
button
[ON SCREEN t] button
Display items
Preparation
5
Connect the video output connector of this unit to the
monitor’s video input connector.
Turn on the monitor and VCR.
When a video signal from a camera is input to the video
input connector, on-screen data is superimposed on the
picture.
When there is no input signal, on-screen data is shown
on a black background.
Changing the on-screen display position
5
Move horizontally.
Press the [ON SCREEN t] button.
[ The display position is moved to the right
5
Move downward.
Press the [ON SCREEN 7] button.
[ The display position is moved down.
Selecting the data display
The data displayed on-screen can be selected on the <ON
SCREEN MODE> screen.
Set the <ONSCREEN/F. DISP MODE> setting to
“ON”.
5
When you do not want to display or record on-screen
data, set the corresponding menu item to
“OFF”.
Changing the on-screen display brightness
Set the brightness with the menu switch <TONE> on the
<ON SCREEN MODE> screen. Select 0IRE, 30IRE, 70IRE
or 100IRE.
• The higher the number, the brighter the characters.
* For details on menu operation, refer to page 22.
ON SCREEN MODE screen
On-screen display
U model
17 (U)
