Filter
Top Products
56 Chapter 3
Disassembling the Veriton 5100
Removing the Housing Cover
CAUTION:
Before you proceed, make sure that you have turned off the system and all peripherals connected
to it.
1.
Turn off the system power and unplug all cables.
2.
Place the system unit on a flat, steady surface.
3.
Turn the thumbscrews counterclockwise to remove the cover. Set the screws aside. You will need the
when replacing the housing cover.
4.
Hold the sides of the cover with both hands. Slide it back about an inch and then gently pull it outward to
detach it.