Filter
Top Products
INTRAC 204 Antenna Control Unit
SOUTH AMERICA
BRAZIL
Tel: +55 11 3054 5701
Fax: +55 11 5041 4026
info.brazil@advantechwireless.com
EUROPE
UNITED KINGDOM
Tel: +44 1480 357 600
Fax: +44 1480 357 601
info.uk@advantechwireless.com
RUSSIA & CIS
Tel: +7 495 967 1859
Fax: +7 495 967 30 24
info.russia@advantechwireless.com
NORTH AMERICA
USA
Tel: + 1 703 788-6882
Fax: +1 703 788-6511
info.usa@advantechwireless.com
CANADA
Tel: +1 514 420-0045
Fax: +1 514 420-0073
info.canada@advantechwireless.com
An ISO 9001 : 2008 Company
Ref.: PB-INTRAC204-004-11036
Specifications are subject to change without notice
www.advantechwireless.com
SPECIFICATIONS
SPECIFICATIONS
Operational modes
Standby Manual (Jog) Search Remote Control
Auto (INTRAC) Go To (Position Designate)
Tracking Accuracy
Typically better than 0.1dB RMS signal degradation after tracking for 24 hours (with tracking signal), for orbit
inclinations up to 10°
Prediction Accuracy
Typically better than 0.1dB RMS signal degradation over 72 hours (after loss of tracking signal), for orbit
inclinations up to 10°
Backup
Model data is stored in EEPROM and the real time clock supported by battery backup against power failure
Configuration Memory
Configuration data is stored in EEPROM
Tracking Signal
May be derived from an external tracking receiver or optionally from the integral IBR-L beacon receiver
External Tracking Signal
Voltage varying directly with received signal strength (in dB).
Sensitivity 0.1V / dB to 1.0V / dB
Offset + / - 10 volts max
Lost Lock input, contact closure when tracking signal is lost.
Display
2 line LCD display giving the areas of information:
Azimuth angle Signal strength Elevation angle
Diagnostics Polarization angle
Mode of operation Operational menus
Drive Outputs
36VDC, up to 8A for direct drive of DC actuator motors
Limit Switches
Limit switch inputs for elevation, azimuth and polarization. Contacts normally closed
Position Transducers
Inputs for standard resolver position transducers
OPTIONS
Internal IBR-L Beacon Receiver
This option accepts an L-Band signal, with an input level of -80 to -45dBm.
The signal voltage and lock lost indicators are generated internally. The need for an external beacon
receiver is eliminated.
Remote Control Terminal
IBM PC compatible software is available to provide a remote control terminal function. The terminal
monitors and controls the INTRAC via the standard serial remote control port and provides facilities for
managing and storing multiple orbit models. Alarm information is still available at the front panel.
Polarisation Option
Option to accept a polarization position transducer and to drive a 36VDC polarization motor.
PHYSICAL
Temperature
Range
0 to 50
o
C - Operating
-25
o
C to 85
o
C - Non Operating (storage)
Humidity
5% to 95% RH non condensing - Operating
0% to 99% RH non condensing - Non Operating (storage)
Altitude
10,000 feet max
Input Power
110 or 230V, single phase, 50/60Hz, 50W
Dimensions
483mm (W) x 133mm (H) x 443mm (D).
Mounting
19" rack mounting unit, 2U high.
Weight
8 kg
EN55022 and EN50082-1
USA
FCC Part 15, Subpart B Class A