Chapter 1 13
Making Basic Measurements
Comparing Signals
10.Press Marker, Delta to anchor the position of the first marker and
activate a second marker.
11. Press FREQUENCY, Center Freq, and the (↑) key to increase the center
frequency by 10 MHz. The first marker moves to the left edge of the
screen, at the amplitude of the first signal peak. See Figure 1-3.
12.Press Peak Search to place the second marker on the highest signal
with the new center frequency setting. See Figure 1-3.
The annotation in the upper right corner of the screen indicates the
amplitude and frequency difference between the two markers.
13.To turn the markers off, press Marker, Off.
Figure 1-3 Frequency and Amplitude Difference Between Signals