Filter
Top Products
Aiphone Communication Systems
1700 130th Ave. N.E.
Bellevue, WA 98005
(425) 455-0510
FAX (425) 455-0071
Toll Free Technical Support:
1-800-692-0200
E-mail tech@aiphone.com
Pg. 5
AXW-AVT Instr.
0309PHJD
Note:
Only information pertaining to the connection and operation of the AXW-AVT and devices interfacing with it are
included here. Aiphone is not responsible for attempts to connect the AXW-AVT to untested 3
rd
party transmission
hardware. For the most up-to-date compatibility information, please consult http://www.aiphone.com or contact Aiphone
Technical Support. For complete installation, wiring, and programming information regarding the AX system, please
refer to the AX Installation Manual, which is included on the CD provided with the AX CEU, or available for download at
http://www.aiphone.com.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device , pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
and correct the interference by one or more of the following measures:
— Reorient or locate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
FCC Class B Verification
SPECIFICATIONS:
Power:
AXW-AVT 24V DC, 500mA (use Aiphone PS-2420UL)
Video Input & Output: Composite 1V Peak-to-Peak, NTSC
Video Connectors: BNC
Door input: RJ-45
Relay: Normally Open contact output; 30V DC, 1A
Sensor: Normally Closed contact input
Wire: CAT-5e, 24AWG UTP-4
Wiring distance:
AXW-AVT to Door, Max. 980' cumulative
AXW-AVT to As close as possible; do not exceed 16'
3
rd
party devices
Dimensions:
AXW-AVT 1-5/8"H x 7"W x 4"D