Aiwa XD-AX10 DVD Player User Manual


 
C:\WINNT\Profiles\Administrator\My
Documents\XD-AX10_GB\01US05GET2-
CEK.fm
master page=left
XD-AX10
3-081-707-11(1)
24
9 Press X/x to select the type of jack
(if any) you are using to connect to
an amplifier (receiver), then press
ENTER.
Choose the item that matches the audio
connection you selected on pages 19 to
22 ( through ).
If you connect just a TV and nothing
else, select “NO.” Quick Setup is
finished and connections are complete.
Select “LINE OUTPUT L/R
(AUDIO).” Quick Setup is finished and
connections are complete.
Select “DIGITAL OUTPUT.” The Setup
Display for “DOLBY DIGITAL” appears.
10Press X/x to select the type of
Dolby Digital signal you wish to
send to your amplifier (receiver).
Choose the signal that matches the audio
connection you selected on pages 20 to
22 ( through ).
D-PCM (page 54)
DOLBY DIGITAL (only if the
amplifier (receiver) has a Dolby Digital
decoder) (page 54)
11Press ENTER.
“DTS” is selected.
12Press X/x to select whether or
not you wish to send a DTS signal
to your amplifier (receiver).
Choose the item that matches the audio
connection you selected on pages 20 to
22 ( through ).
OFF (page 54)
ON (only if the amplifier (receiver) has
a DTS decoder) (page 54)
13Press ENTER.
Quick Setup is finished. All connections
and setup operations are complete.
Enjoying the surround sound
effects
To enjoy the surround sound effects of this
player or your amplifier (receiver), set the
following items as described below for the
audio connection you selected on pages 20 to
22 ( through ). Each of these is the
default setting and does not need to be
adjusted when you first connect the player.
Refer to page 49 for using the Setup Display.
Audio Connection (pages 19 to 22)
No additional settings are needed.
Set “DOWNMIX” to “DOLBY
SURROUND” (page 54)
If the sound distorts even when the volume
is turned down, set “AUDIO ATT” to “ON”
(page 53)
Set “DOWNMIX” to “DOLBY
SURROUND” (page 54)
Set “DIGITAL OUT” to “ON” (page 54)
YES
NO
Is this player connected to an amplifier
(receiver) ? Select the type of jack you
are using.
LINE OUTPUT L/R (AUDIO)
DIGITAL OUTPUT
A
D
A
B-1
C-1
B-2 C-2
D
B D
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
DTS:
OFF
STANDARD
ON
DOWNMIX:
DOLBY SURROUND
D-PCM
DOLBY DIGITAL
D-PCM
B-2 C-2
D
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
OFF
STANDARD
ON
DOWNMIX:
DOLBY SURROUND
D-PCM
DTS:
OFF
OFF
ON
B D
B-2 C-2
D
B D
A
B-1
C-1
B-2 C-2 D
01US01COV.book Page 24 Thursday, December 5, 2002 6:23 PM