Akai CT-2108APF CRT Television User Manual


 
5. Search
In case the desired channel cannot be preset with the Auto Program function, or you would like to set the
desired channels to specific channel numbers, please use the Search function.
After selecting "Frequency" in the TUNE menu, press the
buttons. The TV searches another
lower/upper channel. To stop search, press the MENU button. You can also select the channel frequency
directly by using the Num buttons.
If the selected channel is not the one you want, press the buttons again until the desired channel is selected. If
the TV does not stop searching when finding a channel, please use the Fine Tune function.
6. Frequency Fine-tuning
After selecting "Fine Tune" in the TUNE menu, press the buttons until you get the best sound and
picture effect. Press the DISP button to check up the fine-tuned channel, and you will find that the position
number turns to yellow.
7. Auto Search
Before performing Auto Search, please affirm that the Sound System is correct. After selecting "Auto Search"
in the TUNE menu, press the
button. The TV will search automatically in sequence. After auto searching,
the TV will store receivable channels and returns to POS1.
Unused position number is automatically set to Skip On. During Auto Search, press the MENU button
to stop searching.
8. Swap
Use the SWAP function to resort program position. For example, you want to change Channel 9 to Channel 7.
a. Press the TUNE menu button to select the SWAP menu in the TV mode.
b. Press the
buttons to highlight "Channel A". Press the Numeric buttons to set it to 9. Then set channel B to
7 in the way mentioned above.
c. Select the SWAP menu, and press the
button. The current channel No. is changed to Channel 7 and the
content of Channel 7 is exchanged with that of Channel 9.
The current channel No. is Channel 7.
Repeat the operations mentioned above to sort other searched channel position as desired.
6
Search
VHF H-VHF H- Channel 11
67 75MHz
.67 75MHz.
:
DOWN:DOWN
UPUP
Auto Search
VHF H-VHF H- Channel 11
67 75MHz.67 75MHz.
MENU Stop:MENU Stop:
Channel AChannel A 99
Swap
Swap
SELECT ADJUST
Channel BChannel B
7