American Innovative, 7506 TV Mount User Manual


 
Adjusting Tilt
Using the 7/32” allen wrench, tilt the monitor so it faces up and
locate the set screw under the tilter.
To tighten friction, lightly turn the wrench to the right (clockwise).
To loosen, lightly turn the wrench to the left (counter-clockwise).
When your monitor moves with ease, stays tilted in the up or
down position, the friction is set.
Adjusting Counter-balance
*The monitor MUST be attached before adjusting the counter-balance.
*It is important to hold the arm in a horizontal position before beginning.
Use the 7/32” allen wrench and insert into the top of the end cap. Turn left
(counter-clockwise) to strengthen. Turn right (clockwise) to weaken the arm.
Adjusting Articulation Joints
Use the 3/32” allen wrench to tighten the friction joints found at the
three articulation points until you get the feel of how you would like
your monitor to move.
Your set-up is complete. Please call our customer service depart-
ment at 800.524.2744 if you require additional assistance with this
product or require a return authorization number.
*Due to the different curvature of the various monitor sizes, you may discover space between the back of your monitor and the
top pads of the bracket. This space will not affect the support that your monitor receives. If you feel uncomfortable with this
space, you may uninstall the bracket and bend the top two arms forward until they touch the back of your display.
Adjusting your LCD arm Page 10