Filter
Top Products
Programming The Mio R-2
9
Mio Modero R-2
Configuration Mode
The configuration mode allows you to set the following device features:
IR Transmit Mode (38 KHz, 455 KHz or both 38 KHz IR and RF)
Timeout Adjustment
Download Mode
Debug Mode
Battery Type
LED Awake Brightness
LED Sleep Brightness
To enter configuration Mode:
1. Press and hold the STOP button and the INPUT button. The two buttons must be pressed within 0.1
seconds of each other and held down for 2 seconds. The device indicates you are now in
configuration mode. See below for available modes.
2. Press the EXIT key when you are finished.
IR Transmit Mode
Pressing button "1" on the remote toggles the IR transmission mode between 38KHz, 455KHz, RF, and
both 38KHz IR and RF. The display indicates the current mode.
Timeout Adjustment
Press button "2" on the remote to change the sleep timeout from the default. Each time "2" is pressed, the
sleep timeout raises incrementally. The pre-determined sleep timeouts are:
3 seconds
6 seconds
9 seconds
12 seconds
The display indicates the selected sleep timeout.
IR/RF Code Matrix (Cont.)
Button Label Mode
1
Mode
2
Mode
3
Mode
4
Mode
5
Mode
6
41 S. REV Z 7 47 87 127 167 207
42 PLAY A 1 41 81 121 161 201
43 S. FWD Y 6 46 86 126 166 206
44 REW E 5 45 85 125 165 205
45 FWD D 4 44 84 124 164 204
Your settings will not be lost in the event your batteries die or are removed.