Filter
Top Products
6
POWER KEY
1. Connect TV Cable and Power Cord to this PDP TV Set.
2. Plug Power Cord to your home power outlet.
3. Check front panel LED for proper power connection:
Blue color indicates this TV set is powered on;
Red color indicates this TV set is in standby state.
4. Push POWER KEY on Remote Control or Power key on
Front panel controls to switch the TV from stand by state
to ON state.
This TV will power on and you can see display on screen
within a few minutes.
5. Once you see information displayed on screen,
press Digital button on Remote Control or MODE
key on front panel continuously to select TV as
input source. TV channel information will be
displayed.
6. Use Auto channel search in “Setup Menu” to
search all channels in your location. Refer to page
8 for “Setup Menu” operation procedure.
7. After Auto channel search is completed, press
“CHup” or “CHdown” key on remote control to
select the next lower or higher channel.
Refer to the following pages for operating
procedures:
y Remote Control – page 9.
y Setup Menu – page 10.
y TV Channel Arrangement – page 13.
Ch14.0 12:00AM
TV channel information
Basic Installation