Filter
Top Products
Service Manual AOCe941Series
6
2. Operation instruction
Generalization
Press the power button to turn the monitor on or off. The other control buttons are located at front panel of the
monitor. By changing these settings, the picture can be adjusted to your personal preferences.
z
The power cord should be connected.
z
Connect the video cable from the video card of PC to the monitor.
z
Press the power button to turn on the monitor, the power indicator will light up.
2.1 Control Buttons
Control Description
1
Power Button
To turn ON/OFF the moniteor, and power indicator
(Green/Blue and Amber/Orange).
2
Menu / Enter
Active main menu while no OSD display,enter next level on
main menu or sub menu status, or enter last level on
adjustment bar..
Hotkey ,exit
3
Volume / +
4:3 or wide/ +
Hotkey,Audio volume adjust for VA ,or chang 4:3 or wide
image ratio for SA .
OSD, increase current value of bar, or move to next item of
menu
4
ECO mode(DCR)/ -
If there is no OSD,select the ECO mode of brightness and
DCR.
OSD, it will decrease current value of bar, or it will move to
last item of menu.
5 Auto / Exit
If there is no any OSD, select video source(DVI/RGB).
Press hold to 2s , it is auto configuration.
Exit current OSD and return to last level.