Filter
Top Products
16 Reinsert the screws in the back panel.
Note: As described earlier, your computer may have only
two screws to reinsert, one on either side of the back panel.
17 Reconnect any cables you disconnected at the start of this
process.
Because you pressed the reset button on the logic board
earlier, some of your computer’s software settings may have
changed. (For example, the date and time on your computer
will need to be reset.) You may want to open the control
panels for the date and time, keyboard, and mouse to make
sure that they are set the way you want them. For more
information about resetting these options, see the “Setting
Options” or “Customizing Your Computer” topic of
Macintosh Guide, available in the Guide (h) menu. (If you
do not have Macintosh Guide on your computer, see the
manuals that came with your computer.)
Reinsert these screws.
(Your computer may have only two screws.)
16
Chapter 1