Filter
Top Products
10
Additional Options
ARRICUBE for Videolook – ARRILASER Color Management
ARRILASER Color Management offers the option to perfectly match all
colors of the lm projection with the colors of a video monitor as part of
the ARRILASER image processing workow.
Camera Negative Module – Recording onto Camera Negative Material
The camera negative option enables the ARRILASER to shoot onto
camera negative lm stock. Please see the ARRILASER technical
specication sheet for details of supported lm stocks.
HD Module – Recording of 1920 Pixel per Line
This software plug-in allows the recording of native 1920 pixels per
line (HD Format) across the full aperture or Academy area without any
rescaling.
Native Academy Module – Recording of Full Aperture Images
This software plug-in allows the recording of native full aperture images
(2048 or 4096 pixels per line) across the Academy area without any
rescaling.
3-Perforation Module – Recording of 3-perf Material
This allows the ARRILASER to generate a 3-perf negative with
image frames that are three perforations high.
ARRILASER Aquamat – ARRILASER Quality Control
The ARRILASER Aquamat is an automated image analysis
system for 35 mm lm. It is a portable device that measures
ARRILASER image quality (geometry, photometry, MTF,
are, signal-to-noise gamma and shading), and recalculates
compensation parameters. A statistic function allows it to
monitor performance over time.
Aquamat Lab – Film Printer Quality Control
The Aquamat Lab is an automated lm printer analysis
system for 35 mm lm. It is a portable device that measures
eld uniformity, image sharpness, format and anamorphic
distortion, and delivers results directly to the user. Measure-
ments may be extracted from lm printers (contact and
optical) at each step in the printing process.
Technical Data
Dynamic range 2.046 status M density above D
min
on intermediate lm stock
MTF 40 % @ 40 lp / mm horizontal and vertical
Film transport 2000’ magazines, supply and take-up separate
Shuttle mode 10 frames per second
Supported lmstocks
Kodak Vision Color Intermediate Film 5242 / 2242; Fuji ETERNA-RDI 8511/4511;
EASTMAN Fine Grain Duplicating Panchromatic
Negative Film 5234 / 5366; Separation Material 2238
optional: Kodak Vision 2 100; Kodak Vision 2 50D 5201;
Fuji 64D 8522; Fuji ETERNA Vivid 160 8543
Host computer Linux Redhat distribution with graphical user interface and machine and job database
Network interface Gigabit Ethernet, others upon request
Physical dimensions
size 115 x 115 x 65 cm
weight approx. 285 kg
Electrical requirements
operating voltage 100 – 120 V / 200 – 240 V
power consumption < 1 KW incl. host computer
frequency 50 Hz / 60 Hz
Operating environment
room temperature 19 – 24° Celsius
rel. humidity 20 – 75 % non condensing
Warranty
12 months all inclusive
Laser product Class 1 according to IEC825-1 and EN 60825-1:1997
Class 1 Laser product conforms to 21 CFR 1040.10 6 1040.11, FDA Accession Number 9911131
Technical data are subject to change without notice.