Filter
Top Products
Antennas with two sets of leads
You might have two sets of leads from your antenna system, especially if you have one antenna for
VHF signals and one for UHF signals.
If your antenna system has both a coaxial lead and twin 300ΩΩ leads, you must obtain a combiner
(available at your local electronics store). Press or screw the coaxial lead onto the combiner; place
the twin leads underneath the screws on the combiner and tighten the screws. Press the cable from
the combiner onto
the antenna terminal on the back of your TV.
If your antenna system has two sets of twin 300ΩΩ leads, you must obtain a combiner (available at
your local electronics store). Place one set of twin leads underneath the screws on the combiner and
tighten the screws. Do the same with the other set of twin leads. Press the cable from the combiner
onto the antenna terminal on the back of your TV.
Connecting a cable system
If your cable set-up is not described below, please contact your cable company for more information.
8- Chapter 2: Connecting an Antenna or Cable to your TV
If your cable system does not require the use
of a cable box, simply press or screw the
incoming cable onto the antenna terminal on the
back of your TV.