Filter
Top Products
2. Feature Function, IR Remote
2-1 Power
Pointing the remote towards the IR eye on the LCD, press and
hold
the POWER On/Off button on the remote controller unit until it
turns on
the system. Repeat this procedure to turn off system.
Power On- The LCD monitor will light up, and the green power
light on
the front panel will be ON.
The OSD (On Screen Display) will show the mode of operation.
Power Off- The monitor screen will be dark, the green power
light will
change to orange. The system will go to stand-by mode.
2-2 Input Signal Detection
Tuner system will detect if a signal is received or if a signal is not
received in every mode of signal input. If there is no signal,
screen
will display “No Signal”. Otherwise, the signal will be displayed
showing the mode.
2-3 Contrast/Color/Brightness Adjustment
If you want to adjust contrast/Color/Brightness, press the
appropriate
button. The screen will display the one you choose, then use t
or s
Volume to adjust it within 2.5 seconds. If you take over 2.5
seconds
to adjust, the screen display will disappear and the system will
reset
to t or s Volume.
2-4 Volume Adjustment
Use the t or s volume button to increase or decrease the
audio
volume. You will see the “Volume Bar” on the screen.
2-5 Audio Mute