Filter
Top Products
9ASUS V9520 Home Theater User Guide
1. Boot your computer.
2. When Windows detects your
ASUS graphics card, the
Found New Hardware
Wizard dialog box appears.
3. Click Cancel to enter the Windows
desktop.
4. Insert the support CD into your
CD-ROM drive.
IMPORTANT NOTES
• Quick installation works only when the primary display detected is
an ASUS display card.
• For optimum performance, check the following:
- Make sure the DMA mode is enabled when using IDE DMA/33 or
DMA/66 hard disk drives. To set parameters, click on Start->
Control Panel->System->Device Manager->Disk Drives->
Properties->Settings->Options->DMA.
- Run the Disk Defragmenter (defrag.exe), especially when the
hard disk is almost full.
• Make sure the system power supply can provide the minimum
power requirement of the graphic card.
• When using a motherboard with VIA chipset, install VIA VGARTD
in normal mode.
4.1.2 Windows 2000/XP
Method 1: ASUS Quick Setup Program
5. From the autorun screen, click Drivers then Install ASUS Enhanced
Driver on the Driver dialog box.
6. Follow the onscreen instructions to complete the setup.
7. When Setup has finished installing all the necessary files on your com-
puter, it will prompt you to restart your computer. Click Yes to restart your
computer and to complete Setup.