Filter
Top Products
VC812 User Manual
4
Components
Front View
No. Component Description
1 F/W Upgrade switch Set this to Off to operate the VC812 in Normal Mode.
Note: In case the firmware needs to be upgraded, turn
the switch On to have the VC812 enter Firmware
Upgrade mode. Contact your product dealer for more
details.
2 LED Status The Power LED lights red to indicate that the VC812 is
receiving power.
The Signal LED lights green to indicate that an HDMI
input source is active.
3 IR Receiver This sensor receives signals from the IR remote
control (optional).
Note: Contact your dealer for more information.
4Up / Down
pushbuttons
Pressing the Up / Down pushbuttons moves the
selection to the corresponding fields shown in the
built-in On-Screen Display (OSD).
5 Menu pushbutton Press this button to open the OSD menu and/or select
an option.
1
3
2
4
5