Filter
Top Products
VS0108HA RS-232 Control Tool
5
Switch Port
The Switch Port page is used to turn the display ports On or Off. On the Switch
Port page, the following actions are possible:
Click an Output port to select it. Options are ports 1~8 and * (where * =
all output ports).
Click to turn the Display On or Off.
Click Send to send the command.
Switch Port Commands
These actions can also be performed by keying the command into the text box,
and clicking Send.
The formula for Switch commands is as follows:
Switch Command + Output Command + Port number [Enter]
1. For example, to switch on output port 02, type the following:
sw o02 on [Enter]
2. To switch all output ports off, type the following:
sw o* off [Enter]
3. To turn on the local output port, type the following:
sw ol1 on [Enter]