Filter
Top Products
3
O
N/OFF
M
aintain
R
everse Forward
ON/OFF
Maintain
Reverse Forward
ON/OFF
Maintain
Reverse Forward
FORWARD Mode
When pressing the FORWARD button, the LCD dis-
p
lays AUTO and the motor enters the FORWARD
mode. Press and hold the FORWARD button in order to
keep the motor running forward. When the FORWARD
button is released, the motor will stop.
OVERLOAD Mode
When the shredder overloads during shredding,
the motor will stop running and the LCD will
flash the OVERLOAD icon. Press the REVERSE but-
ton the motor will start reversing and the LCD
will show REVERSE. When the overloaded paper is
removed from the throat, the LCD will show
OVERLOAD, the motor will start running for three
seconds and the shredder will start automatically
clearing any papers. After the motor stops, the
LCD will show AUTO.
If user cannot remove the paper from the throat
by pressing the REVERSE button, tear off the
remaining paper and press ON/OFF to shut off
the shredder. Press ON/OFF again to start shred-
ding and clean out the paper. If unable to clean
out the paper in one action, repeat the above
process until the paper is completely removed
and the LCD displays AUTO.
DOOR OPEN Mode
When the paper bin is pulled out or the bin door
is opened while shredding, the motor will stop
immediately and sound the alar
m. The LCD will
flash DOOR OPEN. To resume normal function,
the bin or door must be placed back to original
position. The LCD will show AUTO.
061506_OD LCD Manual 6/15/06 4:57 PM Page 3