Filter
Top Products
2
www.atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Atlona Component Video Wall Plate with 5 RCA jacks. This wall plate is designed for any installation that re-
quires running cables in the walls. The cable can be attached to the wall plate only if it has RCA connectors. The
wall plate is color coded for component video connection with stereo audio, but it can also be used to connect
any other cable that has RCA connectors.
A great product for custom applications. If you want to hide your cables in the walls, it would be really hard to
not use a wall plate. This wall plate features 24k gold plated RCA connectors. Mostly used to connect audio
and video cables. This wall plate supports 5 RCA connectors. Works with any standard single gang box.
INTRODUCTION
APPLICATIONS
• 24k Gold Plated
• RCA connectors to connect Component Video and Audio Cables
• Color coded to Component Video with Stereo Audio (Green, Blue, Red, White, Red)
• A maximum of 5 RCA connectors can be attached to each side.
SPECIFICATIONS
INSTALLATION
You can mount this speaker wall plate using a standard single electrical box.
1. Route the speaker wires through the opening in the back of the electrical box.
2. For each terminal on the back side of the wall plate, attach the corresponding color coded cables to avoid
future confusion.
3. Remove the Face plate from the wall plate, you will find two screws hidden there. Place the wall plate
against the opening of the electrical box, then thread the two supplied screws through the screw holes in the
wall plate and the electrical box, then tighten the screws and reattach the face plate.
4. For each terminal on the front side of the wall plate, attach the corresponding color coded cables to avoid
future confusion.