Filter
Top Products
Introduction
Features
The AT-HDMI40SR boosts up your video/audio transmission distance up
to 60m/200ft in HDTV 1080i format. With only one cost effective CAT-5/5e
cable, users can readily extend HDTV sources from DVD players, PS3, PC,
or any other kind of HDCP compliant source, to any remote display includ-
ing HDMI/DVI enabled TV set LCD, or monitor. This cost effective solution
allows HDCP compliant sources and players to transmit high quality video
and audio at greater distances.
The AT-HDMI40SR includes two units: transmitting and receiving units.
The transmitting unit is used to capture the input HDMI/DVI signals and
carry the signals through one RJ-45 connector into one CAT-5/5e/6 cable.
The receiving unit is responsible for equalizing the sent TMDS multimedia
data. The transmission distance between the sending and receiving units
can be up to 60m/200ft at 1080i and 40m/130ft at 1080p. With the equaliza-
tion control switch on the receiving unit, users can adjust the equalization
strength to the received TMDS signals, and therefore optimize the trans-
mission distance between source and destination.
• HDMI 1.2a compliant
• Extend the signal distance of an HDMI source up to 60m/200ft at 1080i or 720p
• Extend the signal distance of an HDMI source up to 40m/130ft at 1080p
• HDCP compliant
• Minimize the cable skew by adjustable 8-level equalization knob
1 2