Audio-Technica ATW-R1810 TV Antenna User Manual


 
ATW-R1810
Audio-Technica U.S., Inc., 1221 Commerce Drive, Stow, Ohio 44224
Audio-Technica Limited, Old Lane, Leeds LS11 8AG England
©2010 Audio-Technica U.S., Inc. audio-technica.com 0001-0039-01
Specications
In the interest of standards development, A.T.U.S. offers full
details on its test methods to other industry
professionals on request.
Specications are subject to change without notice.
top
bottom
Dual independent RF sections, automatic-
switching diversity
>50 dB typical
104 dB at 30 kHz deviation (A-weighted),
maximum modulation 37 kHz
≤1% (±10 kHz deviation at 1 kHz)
25 dBµV, (S/N 60 dB at 5 kHz deviation,
A-weighted)
27 mV (at 1 kHz, ±5 kHz deviation)
3-pin mini XLR (TA3M-type)
35 mW max., 32 ohm load
3.5 mm TRS, signals on both Tip and Ring
12V DC nominal, 500 mA
Four 1.5V AA alkaline (not included)
350 mA typical
10 hours typical, depending on battery type
and use pattern
75.0 mm (2.95") W x 125.0 mm (4.92") H x
32.0 mm (1.25") D
300 g (10.5 oz) (without batteries)
Two exible UHF antennas; 18" TA3F- to
XLRM-type output cable; belt pouch
Receiving system
Image rejection
Signal-to-noise ratio
Total harmonic distortion
Sensitivity
Audio output (balanced)
Output connector
Monitor headphone output (typical)
Monitor headphone jack
External power requirements
Batteries
Current consumption (battery)
Battery life
Dimensions
Net weight
Accessories included
87