Filter
Top Products
29
3. Press AUTO MEMORY; all channels in TV or
CATV mode are searched and tuned and the channels with
signals detected are automatically stored.
4. SKIP/SEARCH selects between SKIP and SEARCH mode.
In SKIP mode, the TV only stops on channels that are pro-
grammed into memory when the CHANNEL UP/DOWN
buttons are used. When SKIP mode is off, the TV will stop
on all active channels.
5. To erase a TV channel, press ERASE/WRITE until MANUAL
MEMORY has “erase” displayed on the screen. To store a
TV channel, press this button until MANUAL MEMORY has
“add” displayed on the screen. The stored channel numbers
are displayed in green on the screen while the non-stored
channel numbers are in red.
K. Playing a Video Game
Plug the AV output from your game system into the AV IN jack
on the front of the unit. You can use the attached AV cable to
convert the 3.5mm AV jack on the unit to RCA type AV jacks,
and match the color-coded jacks to the appropriate plugs:
Yellow (VIDEO) to Yellow, white (AUDIO L) to White, and Red
(AUDIO R) to Red. Select the AV mode and adjust the volume/
picture control to individual preference.
L. Use Headphones
1. Wireless IR Hi-Fi headphones may be used with the system.
Simply place batteries in the wireless headphones and
power them up. Make sure there is a clear line of site to the
IR Headphone Sensor.
2. Optional wired Hi-Fi headphones may be used with the
system. Simply plug in the headphone to either headphone
jack on the front of the unit. When using the right headphone
jack both internal speakers will be turned off.