Filter
Top Products
6
3. Charging
The D1726 has a built-in rechargeable battery (Ni-MH) that will power the
unit for approximately 2.5 hours. (Refer to Figure 2)
1) Set the Power switch to the OFF position.
2) Plug one end of the AC-to-DC adapter into the DC 9-12V jack on the right
side of the unit.
3) The red charge indicator light on the left side of the unit will illuminate.
4) When charging is complete, the charge indicator light will turn off.
Note: when charging for the 1st time, allow the unit to charge for at least 8
hours. The unit can only be charged with the AC-to-DC adapter; it will not
charge with the vehicle power adapter.
Charging Indicator
Figure 2