Filter
Top Products
6
E. Vehicle Installation
Installing the DVD Player and monitor onto a car seat
(Refer to Figures 3 through 5)
Elastic
Straps
Carry Bag Closed
Vehicle Seat
Back
Vehicle Headrest
Figure 3
Carry Bag Opened
Headrest
Strap
Seat Back
Strap
3. Built-in Battery
Plug one end of the AC to DC adapter into the DC jack on the side of
the player, then plug the other end into the 120V AC power outlet.
Make sure the player is in the “Power Off” mode. Once fully charged,
the LED indicator will turn off. Once the indicator is off, remove the AC
to DC adapter wall plug.
NOTE: Your new battery must be charged a minimum of 8 hours be-
fore the first usage. Each full recharge takes approximately five hours
and one full charge can provide power to the player for approximately 2
hours.