Filter
Top Products
–
23
–
EN
1L25
PLAYING A DVD VIDEO,
A VIDEO CD, OR AN AUDIO CD
Getting started
Turn on the power of the TV, amplifier and any other
components which are connected to the DVD/VCR.
(Change the input system to suite the DVD/VCR, and
check that the sound volume is correct).
1 Press the POWER button.
¡The power will turn on.
Check that the DVD OUTPUT Light is lit. If not
press the DVD button on the remote control to
switch to DVD/VCR mode.
2 Press the OPEN/CLOSE button.
¡The disc loading tray will open.
3 Place a disc into the tray.
¡Make sure the disc is sitting
properly in the correct recess,
with the label side up.
4 Press the PLAY button.
¡
The tray will close automatically, and playback will
then start from the first chapter or track of the disc. You
need to press the PLAY button only when the tray has
been closed by pressing the OPEN/CLOSE button.
¡
If your DVD has a title menu, it may appear on the screen.
In this case, refer to “USING THE DVD MENUS” in the
next section, or “USING THE TITLE MENU” on page 24.
5 Press the STOP button to stop play.
VCDCDDVD
¡If a disc is dirty or has scratches, the pictures may
appear distorted and the playback operation may
stop. In such cases, clean the disc and unplug the
power cord and then plug it again before resuming
playback.
¡With DVDs that use titles for playback program
signals, playback may start from the second title, or
it may skip these titles.
¡
During the playback of a two layered disc, pictures may
stop for a moment. This happens when the 1st layer
switches to the 2nd layer. This is not a malfunction.
PLAYING A DISC
USING THE DVD MENUS
Some DVDs, or Video CDs contain their own menus,
such as a guidance menu which describes the contents
of the disc or a selection menu for sound, language and
other customized settings.
1 Press the MENU button.
¡The DVD menu will appear.
2 Select the desired title.
¡Press the Arrow buttons (L/K/B/s) to change the
setting, and then press the ENTER button.
3 Playback will start from the selected title.
Cancelling PBC (for playback of a Video CD)
1 Insert a Video CD. (Playback will start
automatically.)
2 Press the STOP button.
3 Enter track number of your choice with the
Number buttons.
4 PBC is now cancelled and the playback of
the Video CD will start.
VCDDVD
AUTO REWIND
When a tape reaches the end during recording, play-
back, or fast-forward, the tape will automatically
rewind to the beginning. After rewinding finishes, the
DVD/VCR will eject the tape and switch itself off.
¡
The DVD/VCR will not rewind the tape automatically
during timer recording or One Touch Recording.
REAL TIME TAPE COUNTER
¡This shows the elapsed recording or playback time
in hours, minutes, and seconds. (The displayed time
will not change during blank portions of the tape.)
¡The indication will appear when the tape is rewound
further than “0:00:00” on the tape counter.
Notes
¡A“prohibited icon” may appear at
the top-right on the TV screen
during operation, warning that a
prohibited operation has been
encountered by the DVD/VCR or
the disc.
H9201MD.qxp 02.11.28 11:38 AM Page 23