Audiovox FPE1507 Flat Panel Television User Manual


 
13
CONNECT THE POWER CORD
Connect the AC power cord into a wall outlet.
Press the STANDBY/ON button on the unit or
remote control to turn on the unit.
CONNECTING AN AUDIO AMPLIFIER
This connection allows you to use an audio amplifier and external speakers.
Connect the right (red) and left (white) audio
OUTPUT from this unit to the right (red) and left
(white) audio INPUT on your amplifier. Refer to
your amplifier’s user manual for more information.
Note:
To control the audio, both the TV and the amplifier
must be turned on, and the volume of the amplifier
must be set above 0, or you will not hear any
sound.
If you want to hear the sound from the amplifier
only, press the VOL – button on the TV to decrease
the volume or press the MUTE button on the remote
control to turn off the sound.
CONNECTIONS
Note:
Be sure the AC power cord is disconnected and all functions are off before making connections.
Make sure that all the components are connected correctly.
To prevent electrical shock, match wide blade of plug to wide slot of wall outlet, then fully
insert.
When you are not going to use the unit for a long period of time, disconnect the power cord.
To AC outlet
PLV1615CS1- E1-23.pmd 20/04/2007, 15:3613